FreeCalypso > hg > freecalypso-tools

comparison CHANGES @ 530:c4c0c9cc2a7c

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
CHANGES: refer to the new doc/Target-utils document
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 16 Jun 2019 19:02:52 +0000
parents 4a7cb2089e5c
children beb8eab9276a
comparison
equal deleted inserted replaced
529:30bec872824a 530:c4c0c9cc2a7c
21 like TI's TCS211 firmware does before sending the DEVOFF command. This 21 like TI's TCS211 firmware does before sending the DEVOFF command. This
22 change fixes the erratic behaviour that was occurring on TI/FC development 22 change fixes the erratic behaviour that was occurring on TI/FC development
23 boards (D-Sample and FCDEV3B) when fc-loadtool (or fc-iram with some 23 boards (D-Sample and FCDEV3B) when fc-loadtool (or fc-iram with some
24 specialized target-utils program) was entered via the RESET button rather 24 specialized target-utils program) was entered via the RESET button rather
25 than PWON, followed by the soft poweroff operation and another switch-on via 25 than PWON, followed by the soft poweroff operation and another switch-on via
26 PWON. For more details, please refer to the Calypso-test-reset article in 26 PWON. For more details, please refer to doc/Target-utils and the
27 the freecalypso-docs repository. 27 Calypso-test-reset article in the freecalypso-docs repository.
28 28
29 * target-utils/flash-boot-test (developers-only target code piece that is not 29 * Aside from the just-described poweroff change, a lot of clean-up has been
30 compiled or installed by default): added a few special watchdog commands to 30 done throughout the target-utils suite: removed all use of bogo-millisecond
31 facilitate experimentation with the watchdog timer function in the Calypso. 31 delays which were previously copied from OsmocomBB; all programs with ABB
32 32 access functionality can access the VRPCAUX register for manual debugging;
33 * Overall target-utils clean-up: removed all use of bogo-millisecond delays 33 helloapp clean-up; new watchdog experimentation commands in flash-boot-test.
34 which were previously copied from OsmocomBB; all programs with ABB access 34 A new doc/Target-utils document has been written describing this target-utils
35 functionality can access the VRPCAUX register for manual debugging. 35 suite.
36 36
37 * Loadtools configuration for Mot C155/156 target (-h c155) fixed to use WS=4 37 * Loadtools configuration for Mot C155/156 target (-h c155) fixed to use WS=4
38 memory timing setting as used by the official fw on this hardware, as opposed 38 memory timing setting as used by the official fw on this hardware, as opposed
39 to the previously-used WS=3 setting that was blindly copied from OsmocomBB. 39 to the previously-used WS=3 setting that was blindly copied from OsmocomBB.
40 40