FreeCalypso > hg > freecalypso-tools
comparison loadtools/scripts/gta02.config @ 0:e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 11 Jun 2016 00:13:35 +0000 |
parents | |
children | 49ee210fc4fb |
comparison
equal
deleted
inserted
replaced
-1:000000000000 | 0:e7502631a0f9 |
---|---|
1 # If one is running fc-loadtool from inside the GTA02 (i.e., from the AP, | |
2 # as opposed to an external host connected via the headset jack), the | |
3 # following setting will cause the fc-loadtool utility to power the modem off | |
4 # fully upon exit. | |
5 | |
6 exit-mode gta02-cutpwr | |
7 | |
8 # The following parameters go into the <p command sent to the boot ROM | |
9 # same values as in pirelli.config, apparently correct for this modem too | |
10 | |
11 pll-config 4/1 # 26 MHz in, PLL&DSP @ 104 MHz, ARM @ 52 MHz | |
12 rhea-cntl 0x00 # fastest setting, used by OsmocomBB, presumably correct | |
13 | |
14 # Configure memory timings with loadagent commands | |
15 init-script k5a3281.init | |
16 | |
17 # Flash type and chip select base address (full access mapping) | |
18 flash k5a32xx_t 0x03000000 |