FreeCalypso > hg > freecalypso-tools
comparison loadtools/scripts/gta02.config @ 0:e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 11 Jun 2016 00:13:35 +0000 |
| parents | |
| children | 49ee210fc4fb |
comparison
equal
deleted
inserted
replaced
| -1:000000000000 | 0:e7502631a0f9 |
|---|---|
| 1 # If one is running fc-loadtool from inside the GTA02 (i.e., from the AP, | |
| 2 # as opposed to an external host connected via the headset jack), the | |
| 3 # following setting will cause the fc-loadtool utility to power the modem off | |
| 4 # fully upon exit. | |
| 5 | |
| 6 exit-mode gta02-cutpwr | |
| 7 | |
| 8 # The following parameters go into the <p command sent to the boot ROM | |
| 9 # same values as in pirelli.config, apparently correct for this modem too | |
| 10 | |
| 11 pll-config 4/1 # 26 MHz in, PLL&DSP @ 104 MHz, ARM @ 52 MHz | |
| 12 rhea-cntl 0x00 # fastest setting, used by OsmocomBB, presumably correct | |
| 13 | |
| 14 # Configure memory timings with loadagent commands | |
| 15 init-script k5a3281.init | |
| 16 | |
| 17 # Flash type and chip select base address (full access mapping) | |
| 18 flash k5a32xx_t 0x03000000 |