FreeCalypso > hg > freecalypso-tools
comparison loadtools/scripts/pirelli.config @ 0:e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 11 Jun 2016 00:13:35 +0000 |
| parents | |
| children | 49ee210fc4fb |
comparison
equal
deleted
inserted
replaced
| -1:000000000000 | 0:e7502631a0f9 |
|---|---|
| 1 # The following parameters go into the <p command sent to the boot ROM | |
| 2 | |
| 3 pll-config 4/1 # 26 MHz in, PLL&DSP @ 104 MHz, ARM @ 52 MHz | |
| 4 rhea-cntl 0x00 # fastest setting, used by OsmocomBB, presumably correct | |
| 5 | |
| 6 # The remaining settings are carried out via loadagent commands | |
| 7 init-script pirelli.init | |
| 8 | |
| 9 # Flash type and chip select base addresses | |
| 10 flash pl129n 0x03000000 0x02000000 | |
| 11 | |
| 12 # On this phone the current best exit strategy is jump0. | |
| 13 # A Iota power-off, even if we implement one, won't be any different: | |
| 14 # having the serial connection implies a USB connection, that in turn | |
| 15 # implies having VBUS, and thus a Iota power-off will immediately | |
| 16 # result in another power-on for charger-insert. | |
| 17 | |
| 18 exit-mode jump0 |