FreeCalypso > hg > freecalypso-tools
diff loadtools/scripts/gen4.config @ 561:392525355ee7
loadtools/scripts: gtm900.config renamed to gen4.config
It turns out that a GTM900 variant exists with 8 MiB flash, thus -h gen8
needs to be used for GTM900 modules as the general case, and the old
-h gtm900 config is best renamed to -h gen4, although not currently official
for any actual target.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 30 Jan 2020 07:10:20 +0000 |
| parents | loadtools/scripts/gtm900.config@26bb2c069427 |
| children |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/loadtools/scripts/gen4.config Thu Jan 30 07:10:20 2020 +0000 @@ -0,0 +1,20 @@ +# This config is meant to be applicable to most "generic" or "vanilla" +# Calypso devices with just the following properties expected: +# +# * Calypso chip is C035, meaning it's ok to run the PLL at 104 MHz +# and give 52 MHz to the ARM7; +# * There is one flash bank on nCS0 and one XRAM bank on nCS1; +# * No more than 4 MiB flash, thus no ADD22. + +# The following parameters go into the <p command sent to the boot ROM +pll-config 4/1 # 26 MHz in, PLL&DSP @ 104 MHz, ARM @ 52 MHz +rhea-cntl 0x00 # good for all Calypso platforms + +# The remaining settings are carried out via loadagent commands +init-script basic-4ws-4mb.init + +# Flash configuration +flash single-4M 0x03000000 + +# Perform a Iota poweroff when we are done +exit-mode iota-off