--- a/doc/DUART28-boot-control	Sun Dec 10 23:42:12 2023 +0000
+++ b/doc/DUART28-boot-control	Tue Dec 12 06:57:11 2023 +0000
@@ -70,13 +70,9 @@
 
 For the next several decades until these maintainers retire of old age and get
 replaced by someone more reasonable and cooperative, our only available solution
-is to apply the necessary patch locally on our own systems.
+is to apply the necessary patch locally on our own systems:
 
-For those FreeCalypso DUART28 users who are like the Mother, desiring to use
-the boot control feature now without waiting indefinitely for Linux kernel
-maintainers to get their act together, the linux-patch directory in our
-freecalypso-hwlab Hg repository contains several versions of our DUART28C
-support patch that are meant to be applied locally by end users.
+https://www.freecalypso.org/hg/fc-linux-patch/
 
 EEPROM configuration
 ====================
@@ -92,8 +88,10 @@
 
 If you have applied our DUART28C support patch to your ftdi_sio driver, then
 you can reprogram the EEPROM on your board into the C configuration and start
-using CTL outputs.  The necessary EEPROM config files and tools can be found in
-our freecalypso-hwlab Hg repository.
+using CTL outputs.  You will need to use fc-duart28-conf utility, maintained as
+part of our fc-usbser-tools package:
+
+https://www.freecalypso.org/pub/GSM/FreeCalypso/fc-usbser-tools-latest.tar.bz2
 
 Support in FC host tools
 ========================