--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/loadtools/scripts/compal.config	Sat Jun 11 00:13:35 2016 +0000
@@ -0,0 +1,36 @@
+# This configuration is intended to be applicable to all of C11x, C123,
+# C139 and C140.  The "plain" version of compalstage selected below
+# should work for all C11x/123; it will also work on C139/140 phones
+# that had the simpler boot code flashed into them, as will be used for
+# FreeCalypso.  When running loadtools with this config on C139/140
+# phones that still have the "official" fw in them, one will need to
+# specify -h compal -c 1003 to use the inefficient ~15 KiB version of
+# compalstage.
+
+compal-stage plain
+
+# Whether we are breaking in through compalstage (as above) or through
+# tfc139, the re-enabled Calypso boot ROM is used to load our loadagent
+# into IRAM.  The boot ROM will autodetect the Calypso input clock as
+# 26 MHz (physical reality) when entered through compalstage, or as
+# 13 MHz when entered through tfc139 - the latter results from the
+# original fw setting bit 7 in the FFFF:FD02 register (VTCXO_DIV2),
+# which the boot ROM does not clear.
+#
+# However, the following configuration will result in the ARM core
+# being clocked at 52 MHz in both cases.
+
+pll-config 4/1
+rhea-cntl 0x00
+
+# The remaining settings are carried out via loadagent commands
+init-script compal.init
+
+# Flash: use CFI autodetection, 4 MiB max
+# mapped at 0, see compal.init for the explanation
+flash cfi-4M 0
+
+boot-reflash-hack 0x820000 0x10000
+
+# Perform a Iota poweroff when we are done
+exit-mode iota-off