FreeCalypso > hg > freecalypso-tools
view loadtools/scripts/gta02.config @ 321:0cb766828d7a
fc-fsio: implemented write-battery-table and write-charging-config commands
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 17 Dec 2017 03:31:54 +0000 |
parents | e7502631a0f9 |
children | 49ee210fc4fb |
line wrap: on
line source
# If one is running fc-loadtool from inside the GTA02 (i.e., from the AP, # as opposed to an external host connected via the headset jack), the # following setting will cause the fc-loadtool utility to power the modem off # fully upon exit. exit-mode gta02-cutpwr # The following parameters go into the <p command sent to the boot ROM # same values as in pirelli.config, apparently correct for this modem too pll-config 4/1 # 26 MHz in, PLL&DSP @ 104 MHz, ARM @ 52 MHz rhea-cntl 0x00 # fastest setting, used by OsmocomBB, presumably correct # Configure memory timings with loadagent commands init-script k5a3281.init # Flash type and chip select base address (full access mapping) flash k5a32xx_t 0x03000000