view loadtools/old/CHANGES @ 965:2969032bdfac

fcup-smsend[mult]: fix buglet in K&R C NULL pointer passing The only 100% safe way to pass a NULL pointer as a function argument in K&R C is to cast 0 to a pointer type; failing to do so may cause mysterious bugs (invalid stack frames or garbage in argument registers) on 64-bit machines. This issue has already been fixed in most of FC host tools, but I just found some missed spots: passing of NULL UDH to PDU encoding functions in fcup-smsend[mult] in the case of single (not concatenated) SMS.
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 01 Sep 2023 07:33:51 +0000
parents 62a91abc0300
children
line wrap: on
line source

Changes from loadtools-r2 to fc-host-tools-r3:

* Implemented support for Mot C1xx (Compal) targets in addition to the
  previously supported Openmoko and Pirelli.  Compal phones have different
  flash, require a different procedure for gaining code download access, and
  have additional bricking concerns.

* Updated loadagent includes Intel flash support and ABB commands needed for
  Compal phones.

* The range of IRAM addresses used by loadagent changed to allow gsm-fw
  ramImage builds (chain-loaded with fc-xram) to load their IRAM code section
  directly into place.

* Loadtool's flash program-bin command now automatically performs a CRC-32
  verification after programming.

* Miscellaneous minor polish.

Changes from loadtools-r1 to loadtools-r2:

* A flash ID check has been implemented in fc-loadtool, invoked automatically
  before doing any erase or program operations, or explicitly at any time with
  the flash info command.  This check ensures that the type of flash chip in
  the target GSM device is the same as what loadtool thinks it is, based on the
  hardware parameters file.

* fc-xram command line syntax changed slightly in order to support immediate
  passing of the serial line to rvinterf/rvtdump.

* Miscellaneous minor polish.