FreeCalypso > hg > freecalypso-tools
view loadtools/scripts/pirelli.config @ 437:2cd705c8116e
loadtools: Mot C155 turns out to have the same flash partition quirks
as the flash chip on TI's D-Sample
c155.config changed to use the fixed 28f640w30b config instead of CFI,
and a bit of C code in fc-loadtool had to be changed too so that
flash erase-program-boot still works.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Tue, 06 Nov 2018 16:02:23 +0000 |
parents | e7502631a0f9 |
children | 49ee210fc4fb |
line wrap: on
line source
# The following parameters go into the <p command sent to the boot ROM pll-config 4/1 # 26 MHz in, PLL&DSP @ 104 MHz, ARM @ 52 MHz rhea-cntl 0x00 # fastest setting, used by OsmocomBB, presumably correct # The remaining settings are carried out via loadagent commands init-script pirelli.init # Flash type and chip select base addresses flash pl129n 0x03000000 0x02000000 # On this phone the current best exit strategy is jump0. # A Iota power-off, even if we implement one, won't be any different: # having the serial connection implies a USB connection, that in turn # implies having VBUS, and thus a Iota power-off will immediately # result in another power-on for charger-insert. exit-mode jump0