FreeCalypso > hg > freecalypso-tools
view loadtools/scripts/c155.init @ 416:30f6d1c32c6f
doc/Flash-boot-defect article removed (no longer relevant)
This article is no longer relevant because the issue in question
only affected one (1) defective FCDEV3B board which was not
and never will be sold.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Fri, 26 Oct 2018 07:11:08 +0000 |
parents | e7502631a0f9 |
children | 35d3f4c26b96 |
line wrap: on
line source
# Set WS=3 for both nCS0 and nCS1, same as the more basic Compal phones w16 fffffb00 00A3 w16 fffffb02 00A3 # We need to switch the CS4/ADD22 pin from its default function of CS4 # to the needed ADD22, to access the 8 MiB of flash. Compal's C155/156 # in-flash boot code does this setting, but let's do it ourselves too. w16 fffef006 0008 # We don't mess with the FFFF:FB10 register on C155/156, i.e., we # leave the "enable boot ROM" setting established by compalstage. # Unlike C139, C155 and C156 phones do have working flash mapping # at 0x03000000, so we use that.