view old/linux-2.6.37.6-ftdi_sio.c.patch @ 416:30f6d1c32c6f

doc/Flash-boot-defect article removed (no longer relevant) This article is no longer relevant because the issue in question only affected one (1) defective FCDEV3B board which was not and never will be sold.
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 26 Oct 2018 07:11:08 +0000
parents 40f44aa49dd0
children
line wrap: on
line source

--- ftdi_sio.c.orig	2011-03-27 11:01:41.000000000 -0800
+++ ftdi_sio.c	2015-10-30 13:18:40.879000032 -0800
@@ -949,7 +949,7 @@
 	static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
 	__u32 divisor;
 	/* divisor shifted 3 bits to the left */
-	int divisor3 = base / 2 / baud;
+	int divisor3 = (base / 2 + baud / 2) / baud;
 	divisor = divisor3 >> 3;
 	divisor |= (__u32)divfrac[divisor3 & 0x7] << 14;
 	/* Deal with special cases for highest baud rates. */
@@ -1087,6 +1087,17 @@
 	baud = tty_get_baud_rate(tty);
 	dbg("%s - tty_get_baud_rate reports speed %d", __func__, baud);
 
+	/*
+	 * FreeCalypso hack: translate non-std high
+	 * baud rates for GSM like CP2102 does.
+	 */
+	if (baud == 230400)
+		baud = 203125;
+	else if (baud == 460800)
+		baud = 406250;
+	else if (baud == 921600)
+		baud = 812500;
+
 	/* 2. Observe async-compatible custom_divisor hack, update baudrate
 	   if needed */