FreeCalypso > hg > freecalypso-tools

view loadtools/old/CHANGES @ 716:3713a349fb1e

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
doc/Loadtools-usage: Mot V17x documented Mot V17x is equivalent to C155/156 for loadtools purposes, but this fact needs to be documented, as it may not be obvious to those who are not as deeply involved.
author Mychaela Falconia <falcon@freecalypso.org>
date Wed, 01 Jul 2020 00:31:37 +0000
parents 62a91abc0300
children
line wrap: on
line source

Changes from loadtools-r2 to fc-host-tools-r3:

* Implemented support for Mot C1xx (Compal) targets in addition to the
  previously supported Openmoko and Pirelli.  Compal phones have different
  flash, require a different procedure for gaining code download access, and
  have additional bricking concerns.

* Updated loadagent includes Intel flash support and ABB commands needed for
  Compal phones.

* The range of IRAM addresses used by loadagent changed to allow gsm-fw
  ramImage builds (chain-loaded with fc-xram) to load their IRAM code section
  directly into place.

* Loadtool's flash program-bin command now automatically performs a CRC-32
  verification after programming.

* Miscellaneous minor polish.

Changes from loadtools-r1 to loadtools-r2:

* A flash ID check has been implemented in fc-loadtool, invoked automatically
  before doing any erase or program operations, or explicitly at any time with
  the flash info command.  This check ensures that the type of flash chip in
  the target GSM device is the same as what loadtool thinks it is, based on the
  hardware parameters file.

* fc-xram command line syntax changed slightly in order to support immediate
  passing of the serial line to rvinterf/rvtdump.

* Miscellaneous minor polish.