view libserial-orig/setbaud.c @ 561:392525355ee7

loadtools/scripts: gtm900.config renamed to gen4.config It turns out that a GTM900 variant exists with 8 MiB flash, thus -h gen8 needs to be used for GTM900 modules as the general case, and the old -h gtm900 config is best renamed to -h gen4, although not currently official for any actual target.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 07:10:20 +0000
parents cb1ba53a1106
children
line wrap: on
line source

/*
 * This module implements the termios/ioctl setting of the baud rate.
 */

#include <sys/types.h>
#include <sys/ioctl.h>
#include <termios.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include "baudrate.h"

extern int target_fd;

struct baudrate *current_baud_rate;

set_serial_baudrate(br)
	struct baudrate *br;
{
	struct termios target_termios;

	target_termios.c_iflag = IGNBRK;
	target_termios.c_oflag = 0;
	target_termios.c_cflag = CLOCAL|HUPCL|CREAD|CS8;
	target_termios.c_lflag = 0;
	target_termios.c_cc[VMIN] = 1;
	target_termios.c_cc[VTIME] = 0;
	cfsetispeed(&target_termios, br->termios_code);
	cfsetospeed(&target_termios, br->termios_code);
	if (tcsetattr(target_fd, TCSAFLUSH, &target_termios) < 0) {
		perror("tcsetattr");
		exit(1);
	}
	current_baud_rate = br;
	return 0;
}