view loadtools/scripts/w220.config @ 927:4e243402f453

rvinterf/lowlevel: use libprint for backslash-escape output
author Mychaela Falconia <falcon@freecalypso.org>
date Tue, 23 May 2023 03:59:42 +0000
parents e8a2634aa265
children
line wrap: on
line source

# The following parameters go into the <p command sent to the boot ROM
pll-config 4/1		# 26 MHz in, PLL&DSP @ 104 MHz, ARM @ 52 MHz
rhea-cntl 0x00		# good for all Calypso platforms

# The remaining settings are carried out via loadagent commands
init-script w220.init

# This phone has a single-bank 8 MiB flash chip on nCS0,
# using the usual 0x03000000 mapping like on other targets
flash single-8M 0x03000000

# Perform a Iota poweroff when we are done
exit-mode iota-off