FreeCalypso > hg > freecalypso-tools
view loadtools/scripts/gen8.config @ 606:519689d3e1c7
doc/opt-freecalypso-tree: scripts addition documented
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 10 Feb 2020 04:03:06 +0000 |
parents | 641d816b1e91 |
children |
line wrap: on
line source
# This config is meant to be applicable to most "generic" or "vanilla" # Calypso devices with just the following properties expected: # # * Calypso chip is C035, meaning it's ok to run the PLL at 104 MHz # and give 52 MHz to the ARM7; # * There is one flash bank on nCS0 and one XRAM bank on nCS1; # * 8 MiB flash chip may be present, thus ADD22 needs to be enabled. # The following parameters go into the <p command sent to the boot ROM pll-config 4/1 # 26 MHz in, PLL&DSP @ 104 MHz, ARM @ 52 MHz rhea-cntl 0x00 # good for all Calypso platforms # The remaining settings are carried out via loadagent commands init-script basic-4ws-8mb.init # Flash configuration flash single-8M 0x03000000 # Perform a Iota poweroff when we are done exit-mode iota-off