FreeCalypso > hg > freecalypso-tools
view loadtools/scripts/fcfam.config @ 579:5f9f6d4276fb
rm loadtools/scripts/k5a3281.init: no longer used
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 02 Feb 2020 21:52:44 +0000 |
parents | 49ee210fc4fb |
children |
line wrap: on
line source
# This loadtool target configuration is intended to be applicable to all # original hardware designs created within the FreeCalypso project, # starting with FCDEV3B. Specifically, it should fit all targets that # satisfy the following criteria: # # The DBB chip is Calypso C035 # The RF block is Rita (26 MHz VCXO) # Spansion S71PL129NC0 used for flash and XRAM, copied from Pirelli DP-L10 # The 2nd flash chip select is wired to nCS2 # The following parameters go into the <p command sent to the boot ROM pll-config 4/1 # 26 MHz in, PLL&DSP @ 104 MHz, ARM @ 52 MHz rhea-cntl 0x00 # good for all Calypso platforms # The remaining settings are carried out via loadagent commands init-script cs2-4ws-8mb.init # Flash global config and chip select base addresses flash dual-8M 0x03000000 0x01800000 # Perform a Iota poweroff when we are done exit-mode iota-off