fc-loadtool help: improve language regarding 16 MiB flash chips In FC project history, 16 MiB flash originally meant Pirelli DP-L10. Then we got FCDEV3B with the same flash (our own design), but now we are discovering more Calypso devices that used such large flash, both late Calypso era (Sony Ericsson K2x0) as well as much earlier ones (FIC FLUID devices.txt file with 2004 dates, Leonardo+ rev 5). Hence we need to migrate to more generic or neutral language in associated documentation, without giving elevated status to specific examples that drove our early project history.

# The present hw parameter file is a minimal config that is appropriate to use
# if the target is known to have a Calypso C035 chip in it but nothing else is
# known, not even the ABB type.  This minimal config is not usable for flash
# manipulation or for fc-xram, but it may be useful for fc-iram or low-level
# (non-flash) fc-loadtool operations.

# The following parameters go into the <p command sent to the boot ROM
pll-config 4/1		# ARM @ 52 MHz, PLL&DSP @ 104 MHz if 26 MHz in
rhea-cntl 0x00		# good for all Calypso platforms