FreeCalypso > hg > freecalypso-tools
view loadtools/scripts/gen8.config @ 995:74024eb17e04
fc-loadtool help: improve language regarding 16 MiB flash chips
In FC project history, 16 MiB flash originally meant Pirelli DP-L10.
Then we got FCDEV3B with the same flash (our own design), but now we are
discovering more Calypso devices that used such large flash, both late
Calypso era (Sony Ericsson K2x0) as well as much earlier ones (FIC FLUID
devices.txt file with 2004 dates, Leonardo+ rev 5). Hence we need to
migrate to more generic or neutral language in associated documentation,
without giving elevated status to specific examples that drove our
early project history.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 03 Dec 2023 21:11:12 +0000 |
parents | 641d816b1e91 |
children |
line wrap: on
line source
# This config is meant to be applicable to most "generic" or "vanilla" # Calypso devices with just the following properties expected: # # * Calypso chip is C035, meaning it's ok to run the PLL at 104 MHz # and give 52 MHz to the ARM7; # * There is one flash bank on nCS0 and one XRAM bank on nCS1; # * 8 MiB flash chip may be present, thus ADD22 needs to be enabled. # The following parameters go into the <p command sent to the boot ROM pll-config 4/1 # 26 MHz in, PLL&DSP @ 104 MHz, ARM @ 52 MHz rhea-cntl 0x00 # good for all Calypso platforms # The remaining settings are carried out via loadagent commands init-script basic-4ws-8mb.init # Flash configuration flash single-8M 0x03000000 # Perform a Iota poweroff when we are done exit-mode iota-off