fc-loadtool help: improve language regarding 16 MiB flash chips In FC project history, 16 MiB flash originally meant Pirelli DP-L10. Then we got FCDEV3B with the same flash (our own design), but now we are discovering more Calypso devices that used such large flash, both late Calypso era (Sony Ericsson K2x0) as well as much earlier ones (FIC FLUID devices.txt file with 2004 dates, Leonardo+ rev 5). Hence we need to migrate to more generic or neutral language in associated documentation, without giving elevated status to specific examples that drove our early project history.

# The following parameters go into the <p command sent to the boot ROM
pll-config 4/1		# 26 MHz in, PLL&DSP @ 104 MHz, ARM @ 52 MHz
rhea-cntl 0x00		# good for all Calypso platforms

# The remaining settings are carried out via loadagent commands
init-script w220.init

# This phone has a single-bank 8 MiB flash chip on nCS0,
# using the usual 0x03000000 mapping like on other targets
flash single-8M 0x03000000

# Perform a Iota poweroff when we are done
exit-mode iota-off