target-utils: added 10 ms delay at the end of abb_power_off() The deosmification of the ABB access code (replacement of osmo_delay_ms() bogus delays with correctly-timed ones, which are significantly shorter) had one annoying side effect: when executing the poweroff command from any of the programs, one last '=' prompt character was being sent (and received by the x86 host) as the Calypso board powers off. With delays being shorter now, the abb_power_off() function was returning and the standalone program's main loop was printing its prompt before the Iota chip fully executed the switch-off sequence! I thought about inserting an endless tight loop at the end of the abb_power_off() function, but the implemented solution of a 10 ms delay is a little nicer IMO because if the DEVOFF operation doesn't happen for some reason in a manual hacking scenario, there won't be an artificial blocker in the form of a tight loop keeping us from further poking around.

/*
 * This module contains the initialization code for fc-shell.
 */

#include <sys/types.h>
#include <stdio.h>
#include <string.h>
#include <strings.h>
#include <stdlib.h>
#include "pktmux.h"
#include "localsock.h"

init()
{
	static u_char want_rvt_lost[9] = {CLI2RVI_WANT_RVTRACE,
					  0xFF, 0xFF, 0xFF, 0xFF,
					  0x00, 0x00, 0x00, 0x00};

	localsock_prep_for_length_rx();
	send_init_command(want_rvt_lost, 9);
}