FreeCalypso > hg > freecalypso-tools
view rvinterf/asyncshell/sendsp.c @ 497:74610c4f10f7
target-utils: added 10 ms delay at the end of abb_power_off()
The deosmification of the ABB access code (replacement of osmo_delay_ms()
bogus delays with correctly-timed ones, which are significantly shorter)
had one annoying side effect: when executing the poweroff command from
any of the programs, one last '=' prompt character was being sent (and
received by the x86 host) as the Calypso board powers off. With delays
being shorter now, the abb_power_off() function was returning and the
standalone program's main loop was printing its prompt before the Iota chip
fully executed the switch-off sequence!
I thought about inserting an endless tight loop at the end of the
abb_power_off() function, but the implemented solution of a 10 ms delay
is a little nicer IMO because if the DEVOFF operation doesn't happen for
some reason in a manual hacking scenario, there won't be an artificial
blocker in the form of a tight loop keeping us from further poking around.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 25 May 2019 20:44:05 +0000 |
parents | d43d82cbfb85 |
children |
line wrap: on
line source
/* * Functions for sending GPF system primitives to the target */ #include <sys/types.h> #include <stdio.h> #include <ctype.h> #include <string.h> #include <strings.h> #include <stdlib.h> #include "pktmux.h" #include "limits.h" #include "exitcodes.h" send_gpf_sysprim(stackdest, primstr) char *stackdest, *primstr; { unsigned intlen; u_char sendpkt[MAX_PKT_TO_TARGET+1]; unsigned pktlen; if (strlen(stackdest) > 4) { printf( "error: stack destination arg may not exceed 4 characters\n"); return(ERROR_USAGE); } intlen = 12 + strlen(primstr); pktlen = intlen + 4; if (pktlen > MAX_PKT_TO_TARGET) { printf("error: max pkt to target limit exceeded\n"); return(ERROR_USAGE); } /* fill out the packet */ sendpkt[0] = RVT_L23_HEADER; sendpkt[1] = 0xB7; /* system prim */ sendpkt[2] = intlen; sendpkt[3] = intlen >> 8; /* send zeros for the timestamp */ sendpkt[4] = 0; sendpkt[5] = 0; sendpkt[6] = 0; sendpkt[7] = 0; /* as far as TI's sw is concerned, we are PCO */ sendpkt[8] = 'P'; sendpkt[9] = 'C'; sendpkt[10] = 'O'; sendpkt[11] = ' '; sprintf(sendpkt + 12, "%-4s%s", stackdest, primstr); /* send it! */ send_pkt_to_target(sendpkt, pktlen); return(0); } void cmd_sp_interactive(args) char *args; { char *cp, *np; for (cp = args; isspace(*cp); cp++) ; if (!*cp) { err: printf("error: two arguments required\n"); return; } for (np = cp; *cp && !isspace(*cp); cp++) ; if (!*cp) goto err; *cp++ = '\0'; while (isspace(*cp)) cp++; if (!*cp) goto err; gpf_rx_control(1); send_gpf_sysprim(np, cp); } cmd_sp_oneshot(argc, argv) char **argv; { return send_gpf_sysprim(argv[1], argv[2]); }