view rvinterf/lowlevel/packetrx.c @ 497:74610c4f10f7

target-utils: added 10 ms delay at the end of abb_power_off() The deosmification of the ABB access code (replacement of osmo_delay_ms() bogus delays with correctly-timed ones, which are significantly shorter) had one annoying side effect: when executing the poweroff command from any of the programs, one last '=' prompt character was being sent (and received by the x86 host) as the Calypso board powers off. With delays being shorter now, the abb_power_off() function was returning and the standalone program's main loop was printing its prompt before the Iota chip fully executed the switch-off sequence! I thought about inserting an endless tight loop at the end of the abb_power_off() function, but the implemented solution of a 10 ms delay is a little nicer IMO because if the DEVOFF operation doesn't happen for some reason in a manual hacking scenario, there won't be an artificial blocker in the form of a tight loop keeping us from further poking around.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 25 May 2019 20:44:05 +0000
parents e7502631a0f9
children
line wrap: on
line source

/*
 * This module handles the lowest level of serial packet Rx
 */

#include <sys/types.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include "../include/pktmux.h"
#include "../include/limits.h"

extern int target_fd;

u_char rxpkt[MAX_PKT_FROM_TARGET];
size_t rxpkt_len;

static int in_pkt, dle_state, toobig;

static void
process_inbyte(inb)
{
	char errbuf[128];

	if (!in_pkt) {
		if (inb != STX || dle_state) {
			rxpkt_len++;
			dle_state = (inb == DLE);
			return;
		}
		if (rxpkt_len) {
			sprintf(errbuf,
				"Warning: Rx %u byte%s outside of a packet",
				(unsigned)rxpkt_len, rxpkt_len != 1 ? "s" : "");
			output_line(errbuf);
			rxpkt_len = 0;
		}
		in_pkt = 1;
		toobig = 0;
		return;
	}
	if (dle_state) {
		dle_state = 0;
		if (inb != STX && inb != DLE) {
			sprintf(errbuf,
				"Rx framing error: %02X after DLE", inb);
			output_line(errbuf);
			in_pkt = 0;
			rxpkt_len = 0;
			return;
		}
		goto data;
	}
	if (inb == DLE) {
		dle_state = 1;
		return;
	} else if (inb == STX) {
		if (!rxpkt_len)
			return;
		in_pkt = 0;
		handle_rx_packet();
		rxpkt_len = 0;
		return;
	}
data:	if (rxpkt_len >= MAX_PKT_FROM_TARGET) {
		if (!toobig) {
			output_line("Error: Rx packet too big!");
			toobig = 1;
		}
		return;
	}
	rxpkt[rxpkt_len++] = inb;
}

void
process_serial_rx()
{
	u_char rdbuf[512];
	int cc, i;

	cc = read(target_fd, rdbuf, sizeof rdbuf);
	if (cc <= 0) {
		perror("Error/EOF reading from target");
		exit(1);
	}
	for (i = 0; i < cc; i++)
		process_inbyte(rdbuf[i]);
}