target-utils: added 10 ms delay at the end of abb_power_off() The deosmification of the ABB access code (replacement of osmo_delay_ms() bogus delays with correctly-timed ones, which are significantly shorter) had one annoying side effect: when executing the poweroff command from any of the programs, one last '=' prompt character was being sent (and received by the x86 host) as the Calypso board powers off. With delays being shorter now, the abb_power_off() function was returning and the standalone program's main loop was printing its prompt before the Iota chip fully executed the switch-off sequence! I thought about inserting an endless tight loop at the end of the abb_power_off() function, but the implemented solution of a 10 ms delay is a little nicer IMO because if the DEVOFF operation doesn't happen for some reason in a manual hacking scenario, there won't be an artificial blocker in the form of a tight loop keeping us from further poking around.

CC=	arm-elf-gcc
CFLAGS=	-Os -fno-builtin
CPPFLAGS=-I../include
LD=	arm-elf-ld
OBJCOPY=arm-elf-objcopy

INSTDIR=/opt/freecalypso/target-bin

PROG=	flash-boot-wa
LDS=	../env/iram.lds

all:	${PROG}.srec

${PROG}.elf:	${PROG}.o ${LDS}
	${LD} -N --defsym Base_addr=0x820000 -T ${LDS} -o $@ ${PROG}.o

${PROG}.srec:	${PROG}.elf
	${OBJCOPY} -O srec --srec-forceS3 --srec-len=30 $< $@

install:
	mkdir -p ${INSTDIR}
	install -c -m 644 ${PROG}.srec ${INSTDIR}

clean:
	rm -f *.o *errs *core *.elf *.bin *.srec

FRC: