FreeCalypso > hg > freecalypso-tools
view loadtools/scripts/c155.config @ 501:7a6eba04c1bb
CHANGES: target-utils poweroff VRPCAUX addition documented
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 27 May 2019 01:12:43 +0000 |
parents | 2cd705c8116e |
children | 49ee210fc4fb |
line wrap: on
line source
# This configuration is for Motorola C155/156 phones. Use the "generic" # compal configuration for C11x/123 and C139/140. compal-stage thumb # Parameters for the Calypso boot ROM; # will result in the ARM core being clocked at 52 MHz as we want. pll-config 4/1 rhea-cntl 0x00 # The remaining settings are carried out via loadagent commands init-script c155.init # 8 MiB flash, accessible at 0x03000000 without the strange issue # seen on the lower C1xx models, but the flash chip turns out to have # partition quirks like the one on the D-Sample, so we need to # tell fc-loadtool about it explicitly instead of using CFI. # The actual chip in these phones is a flash+RAM MCP, but the flash part # is exactly the same as the 28F640W30B on the D-Sample (same geometry, # same ID codes), so we just tell fc-loadtool that it's a 28F640W30B. flash 28f640w30b 0x03000000 # bottom boot flash, sector 0 is only 8 KiB boot-reflash-hack 0x820000 0x2000 # Perform a Iota poweroff when we are done exit-mode iota-off