FreeCalypso > hg > freecalypso-tools
view loadtools/CHANGES @ 505:7bf0d909c87e
fc-loadtool flash ID check: change of reset after the check logic
This change only affects those flash configurations that have ID checks
enabled. The logic for resetting the flash after the ID check has been
changed as follows:
1) If the check fails, we return without attempting to reset the flash.
2) If the check is successful, we reset the flash using the configured
method (could be AMD or Intel or Intel W30) instead of always doing an
AMD flash reset as the original code did.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Mon, 27 May 2019 19:58:01 +0000 |
| parents | e7502631a0f9 |
| children |
line wrap: on
line source
Changes from loadtools-r2 to fc-host-tools-r3: * Implemented support for Mot C1xx (Compal) targets in addition to the previously supported Openmoko and Pirelli. Compal phones have different flash, require a different procedure for gaining code download access, and have additional bricking concerns. * Updated loadagent includes Intel flash support and ABB commands needed for Compal phones. * The range of IRAM addresses used by loadagent changed to allow gsm-fw ramImage builds (chain-loaded with fc-xram) to load their IRAM code section directly into place. * Loadtool's flash program-bin command now automatically performs a CRC-32 verification after programming. * Miscellaneous minor polish. Changes from loadtools-r1 to loadtools-r2: * A flash ID check has been implemented in fc-loadtool, invoked automatically before doing any erase or program operations, or explicitly at any time with the flash info command. This check ensures that the type of flash chip in the target GSM device is the same as what loadtool thinks it is, based on the hardware parameters file. * fc-xram command line syntax changed slightly in order to support immediate passing of the serial line to rvinterf/rvtdump. * Miscellaneous minor polish.