FreeCalypso > hg > freecalypso-tools
view loadtools/scripts/pirelli.init @ 505:7bf0d909c87e
fc-loadtool flash ID check: change of reset after the check logic
This change only affects those flash configurations that have ID checks
enabled. The logic for resetting the flash after the ID check has been
changed as follows:
1) If the check fails, we return without attempting to reset the flash.
2) If the check is successful, we reset the flash using the configured
method (could be AMD or Intel or Intel W30) instead of always doing an
AMD flash reset as the original code did.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 27 May 2019 19:58:01 +0000 |
parents | e7502631a0f9 |
children |
line wrap: on
line source
# This phone has 3 memory chip selects: # # nCS0: flash chip select 1 # nCS1: RAM chip select # nCS3: flash chip select 2 # # All 3 chip select lines go to the same physical IC, a RAM/flash MCP. # We set WS=4 for all 3 here, copying what OsmocomBB does. The access # time listed in the datasheet is 70 ns for both RAM and flash, and per # my math setting WS=3 *might* work, but it could be marginal, so let's # play it safe for now. w16 fffffb00 00A4 w16 fffffb02 00A4 w16 fffffb06 00A4 # We also need to switch the CS4/ADD22 pin from its default function # of CS4 to the needed ADD22. w16 fffef006 0008 # With this phone all Calypso serial access always goes through the # CP2102 usb2serial IC inside the phone itself, which is programmed # to support the high non-standard baud rates. So we can safely # switch to 812500 baud unconditionally. baud 812500