view loadtools/ttypassthru.c @ 505:7bf0d909c87e

fc-loadtool flash ID check: change of reset after the check logic This change only affects those flash configurations that have ID checks enabled. The logic for resetting the flash after the ID check has been changed as follows: 1) If the check fails, we return without attempting to reset the flash. 2) If the check is successful, we reset the flash using the configured method (could be AMD or Intel or Intel W30) instead of always doing an AMD flash reset as the original code did.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 27 May 2019 19:58:01 +0000
parents e7502631a0f9
children
line wrap: on
line source

/*
 * This module implements the pass-thru operation mode, in which
 * the Unix host tty is cross-connected directly to the target
 * running some code we have just loaded.
 */

#include <sys/types.h>
#include <sys/ioctl.h>
#include <sys/errno.h>
#include <termios.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <strings.h>

extern int errno;

extern int target_fd;

static struct termios saved_termios, my_termios;

static void
safe_output(buf, cc)
	u_char *buf;
{
	int i, c;

	for (i = 0; i < cc; i++) {
		c = buf[i];
		if (c == '\r' || c == '\n' || c == '\t' || c == '\b') {
			putchar(c);
			continue;
		}
		if (c & 0x80) {
			putchar('M');
			putchar('-');
			c &= 0x7F;
		}
		if (c < 0x20) {
			putchar('^');
			putchar(c + '@');
		} else if (c == 0x7F) {
			putchar('^');
			putchar('?');
		} else
			putchar(c);
	}
	fflush(stdout);
}

static void
loop()
{
	char buf[BUFSIZ];
	fd_set fds, fds1;
	register int i, cc, max;

	FD_ZERO(&fds);
	FD_SET(0, &fds);
	FD_SET(target_fd, &fds);
	max = target_fd + 1;
	for (;;) {
		bcopy(&fds, &fds1, sizeof(fd_set));
		i = select(max, &fds1, NULL, NULL, NULL);
		if (i < 0) {
			if (errno == EINTR)
				continue;
			tcsetattr(0, TCSAFLUSH, &saved_termios);
			perror("select");
			exit(1);
		}
		if (FD_ISSET(0, &fds1)) {
			cc = read(0, buf, sizeof buf);
			if (cc <= 0)
				return;
			if (cc == 1 && buf[0] == 0x1C)
				return;
			write(target_fd, buf, cc);
		}
		if (FD_ISSET(target_fd, &fds1)) {
			cc = read(target_fd, buf, sizeof buf);
			if (cc <= 0) {
				tcsetattr(0, TCSAFLUSH, &saved_termios);
				fprintf(stderr, "EOF/error on target tty\n");
				exit(1);
			}
			safe_output(buf, cc);
		}
	}
}

tty_passthru()
{
	static int zero = 0;

	ioctl(target_fd, FIONBIO, &zero);

	tcgetattr(0, &saved_termios);
	bcopy(&saved_termios, &my_termios, sizeof(struct termios));
	cfmakeraw(&my_termios);
	my_termios.c_cc[VMIN] = 1;
	my_termios.c_cc[VTIME] = 0;
	tcsetattr(0, TCSAFLUSH, &my_termios);

	printf("Entering tty pass-thru; type ^\\ to exit\r\n\n");
	loop();
	tcsetattr(0, TCSAFLUSH, &saved_termios);
	return 0;
}