view rvinterf/etmsync/readcal.c @ 505:7bf0d909c87e

fc-loadtool flash ID check: change of reset after the check logic This change only affects those flash configurations that have ID checks enabled. The logic for resetting the flash after the ID check has been changed as follows: 1) If the check fails, we return without attempting to reset the flash. 2) If the check is successful, we reset the flash using the configured method (could be AMD or Intel or Intel W30) instead of always doing an AMD flash reset as the original code did.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 27 May 2019 19:58:01 +0000
parents e40bb5a6c6b9
children
line wrap: on
line source

/*
 * This utility reads the RF calibration data out of a TI-based GSM device
 * using the L1TM protocol over RVTMUX.  Warning: invasive tms 1 and rfpw 7
 * commands are issued to the target in order to select the band of interest!
 */

#include <sys/types.h>
#include <sys/file.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <strings.h>
#include <unistd.h>
#include "tm3.h"
#include "l1tm.h"
#include "localtypes.h"
#include "exitcodes.h"

int compal_mode;

extern char *socket_pathname;
extern char *rvinterf_ttyport, *rvinterf_Bopt, *rvinterf_lopt, *rvinterf_wopt;

/* macro for encoding std and band in rfpw 7 command */
#define	RFPW_STD_BAND(std,band)	((std) | ((band) << 8))

static struct band {
	char		*argname;
	char		*filename;
	unsigned	rfpw_std_band;
} bands[] = {
	{"900",   "900",  RFPW_STD_BAND(6, 0)},
	{"1800",  "1800", RFPW_STD_BAND(6, 1)},
	{"1900",  "1900", RFPW_STD_BAND(8, 1)},
	{"850",   "850",  RFPW_STD_BAND(8, 0)},
	{"1900s", "1900", RFPW_STD_BAND(3, 0)},
	{"850s",  "850",  RFPW_STD_BAND(7, 0)},
	{0,       0,      0}
};

static void
write_out_file(filename, data, size)
	char *filename;
	u_char *data;
{
	int fd;

	fd = open(filename, O_WRONLY|O_CREAT|O_TRUNC, 0666);
	if (fd < 0) {
		perror(filename);
		exit(ERROR_UNIX);
	}
	write(fd, data, size);
	close(fd);
}

copy_afcdac()
{
	u16 datum;
	u_char bytes[2];
	int rc;

	rc = do_rfpr(INITIAL_AFC_DAC, &datum);
	if (rc)
		exit(rc);
	datum <<= 3;
	bytes[0] = datum;
	bytes[1] = datum >> 8;
	write_out_file("afcdac", bytes, 2);
}

copy_afcparams()
{
	u_char table[24];
	int rc;

	rc = do_rftr(AFC_PARAMS, table, sizeof table);
	if (rc)
		exit(rc);
	write_out_file("afcparams", table, sizeof table);
}

copy_rx_agcparams(bandname)
	char *bandname;
{
	u_char table[8];
	char filename[32];
	int rc;

	rc = do_rftr(RX_AGC_PARAMS, table, sizeof table);
	if (rc)
		exit(rc);
	sprintf(filename, "rx/agcparams.%s", bandname);
	write_out_file(filename, table, sizeof table);
}

copy_rx_calchan(bandname)
	char *bandname;
{
	u_char table[40];
	char filename[32];
	int rc;

	rc = do_rftr(RX_CAL_CHAN, table, sizeof table);
	if (rc)
		exit(rc);
	sprintf(filename, "rx/calchan.%s", bandname);
	write_out_file(filename, table, sizeof table);
}

copy_tx_levels(bandname)
	char *bandname;
{
	u_char table[128];
	char filename[32];
	int rc;

	rc = do_rftr(TX_LEVELS, table, sizeof table);
	if (rc)
		exit(rc);
	sprintf(filename, "tx/levels.%s", bandname);
	write_out_file(filename, table, sizeof table);
}

copy_tx_calchan(bandname)
	char *bandname;
{
	u_char table[128];
	char filename[32];
	int rc;

	rc = do_rftr(TX_CAL_CHAN, table, sizeof table);
	if (rc)
		exit(rc);
	sprintf(filename, "tx/calchan.%s", bandname);
	write_out_file(filename, table, sizeof table);
}

copy_tx_ramps(bandname)
	char *bandname;
{
	u_char table[512];
	char filename[32];
	int rc, i;

	for (i = 0; i < 16; i++) {
		rc = do_ttr(i, table + i * 32);
		if (rc)
			exit(rc);
	}
	sprintf(filename, "tx/ramps.%s", bandname);
	write_out_file(filename, table, sizeof table);
}

process_band(bandname)
	char *bandname;
{
	int rc;

	rc = host_mkdir("rx");
	if (rc)
		exit(rc);
	copy_rx_agcparams(bandname);
	if (!compal_mode)
		copy_rx_calchan(bandname);
	rc = host_mkdir("tx");
	if (rc)
		exit(rc);
	copy_tx_levels(bandname);
	if (!compal_mode)
		copy_tx_calchan(bandname);
	copy_tx_ramps(bandname);
}

single_op_main(argc, argv)
	char **argv;
{
	int rc;
	char **ap;
	struct band *tp;

	if (argc < 2) {
		fprintf(stderr,
		"usage: fc-readcal [options] output-dir band...\n");
		exit(ERROR_USAGE);
	}
	if (chdir(argv[0]) < 0) {
		perror(argv[0]);
		exit(ERROR_UNIX);
	}
	rc = do_tms(1);
	if (rc)
		exit(rc);
	for (ap = argv + 1; *ap; ap++) {
		if (!strcmp(*ap, "afc")) {
			copy_afcdac();
			copy_afcparams();
			continue;
		}
		for (tp = bands; tp->argname; tp++)
			if (!strcmp(*ap, tp->argname))
				break;
		if (!tp->argname) {
			fprintf(stderr, "error: unknown band name \"%s\"\n",
				*ap);
			exit(ERROR_USAGE);
		}
		rc = do_rfpw(STD_BAND_FLAG, tp->rfpw_std_band);
		if (rc)
			exit(rc);
		process_band(tp->filename);
	}
	exit(0);
}

main(argc, argv)
	char **argv;
{
	extern int optind;
	extern char *optarg;
	int c, sopt = 0;

	while ((c = getopt(argc, argv, "B:cl:p:s:w:")) != EOF)
		switch (c) {
		case 'B':
			rvinterf_Bopt = optarg;
			continue;
		case 'c':
			compal_mode++;
			continue;
		case 'l':
			rvinterf_lopt = optarg;
			continue;
		case 'p':
			rvinterf_ttyport = optarg;
			continue;
		case 's':
			socket_pathname = optarg;
			sopt++;
			continue;
		case 'w':
			rvinterf_wopt = optarg;
			continue;
		case '?':
		default:
			/* error msg already printed */
			exit(ERROR_USAGE);
		}
	if (rvinterf_ttyport) {
		if (sopt) {
			fprintf(stderr,
			"%s error: -p and -s options are mutually exclusive\n",
				argv[0]);
			exit(ERROR_USAGE);
		}
		if (compal_mode && !rvinterf_Bopt)
			rvinterf_Bopt = "57600";
		launch_rvinterf(1);
	} else {
		if (rvinterf_Bopt || rvinterf_lopt || rvinterf_wopt) {
			fprintf(stderr,
"%s error: -B, -l and -w options are meaningful only when launching rvinterf\n",
				argv[0]);
			exit(ERROR_USAGE);
		}
		connect_local_socket();
	}

	return single_op_main(argc - optind, argv + optind);
}