FreeCalypso > hg > freecalypso-tools
view rvinterf/include/etm.h @ 505:7bf0d909c87e
fc-loadtool flash ID check: change of reset after the check logic
This change only affects those flash configurations that have ID checks
enabled. The logic for resetting the flash after the ID check has been
changed as follows:
1) If the check fails, we return without attempting to reset the flash.
2) If the check is successful, we reset the flash using the configured
method (could be AMD or Intel or Intel W30) instead of always doing an
AMD flash reset as the original code did.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Mon, 27 May 2019 19:58:01 +0000 |
| parents | e7502631a0f9 |
| children | c535e7438c25 |
line wrap: on
line source
/* * This header file contains various definitions for talking to ETM. */ #define ETM_USE_ID 0x001E0004 /* ETM Module IDs */ enum { ETM_TM3 = 0x00, // Use of old TM3 protocol ETM_CORE = 0x01, ETM_TMT = 0x02, // Pseudo module ETM_SH = 0x03, // Pseudo module ETM_TM3_MISC = 0x04, // Pseudo module - Target side ETM_RF = 0x05, ETM_IMEI = 0x06, ETM_FFS2 = 0x07, ETM_AUDIO = 0x08, ETM_TPU = 0x09, // Not official part ETM ETM_PWR = 0x0A, ETM_BT = 0x0B, ETM_L23 = 0x0C, ETM_RESERVED10 = 0x0D, ETM_RESERVED11 = 0x0E, ETM_RESERVED12 = 0x0F, ETM_CUST = 0xC0, // Customize id ETM_CUST1 = 0xC1, // Customize id ETM_CUST2 = 0xC2, // Customize id ETM_CUST3 = 0xC3, // Customize id ETM_CUST4 = 0xC4, // Customize id ETM_CUST5 = 0xC5, // Customize id ETM_CUST6 = 0xC6, // Customize id ETM_CUST7 = 0xC7, // Customize id ETM_CUST8 = 0xC8, // Customize id ETM_TEST = 0xAA, // used for test of dll's ETM_TASK = 0xEE, // ETM TASK in Target ETM_FFS1 = 0x70 }; /* ETM_CORE opcodes */ #define TMCORE_OPC_MEM 0x61 #define TMCORE_OPC_ECHO 0x62 #define TMCORE_OPC_RESET 0x63 #define TMCORE_OPC_DEBUG 0x64 #define TMCORE_OPC_VERSION 0x65 #define TMCORE_OPC_CODEC_RD 0x66 #define TMCORE_OPC_CODEC_WR 0x67 #define TMCORE_OPC_DIEID 0x68 #define MAX_MEMREAD_BYTES 238 #define MAX_MEMREAD_16BIT 119