FreeCalypso > hg > freecalypso-tools
view rvinterf/old/before-rvinterf/pktmux.h @ 505:7bf0d909c87e
fc-loadtool flash ID check: change of reset after the check logic
This change only affects those flash configurations that have ID checks
enabled. The logic for resetting the flash after the ID check has been
changed as follows:
1) If the check fails, we return without attempting to reset the flash.
2) If the check is successful, we reset the flash using the configured
method (could be AMD or Intel or Intel W30) instead of always doing an
AMD flash reset as the original code did.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 27 May 2019 19:58:01 +0000 |
parents | e7502631a0f9 |
children |
line wrap: on
line source
/* * Definitions for the RVT MUX over-the-wire protocol */ #define STX 0x02 #define DLE 0x10 #define RVT_RV_HEADER 0x11 #define RVT_L1_HEADER 0x12 #define RVT_L23_HEADER 0x13 #define RVT_TM_HEADER 0x14 #define RVT_RNET_HEADER 0x15 #define RVT_PROF_HEADER 0x16 #define RVT_GTTBACK_HEADER 0x17 #define RVT_OTHER_HEADER 0x18 #define RVT_INVALID_HEADER 0xFF