FreeCalypso > hg > freecalypso-tools
view rvinterf/tmsh/abbtm3.c @ 505:7bf0d909c87e
fc-loadtool flash ID check: change of reset after the check logic
This change only affects those flash configurations that have ID checks
enabled. The logic for resetting the flash after the ID check has been
changed as follows:
1) If the check fails, we return without attempting to reset the flash.
2) If the check is successful, we reset the flash using the configured
method (could be AMD or Intel or Intel W30) instead of always doing an
AMD flash reset as the original code did.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 27 May 2019 19:58:01 +0000 |
parents | 74b9aeb25d79 |
children |
line wrap: on
line source
/* * Old TM3 versions of ABB register read and write commands */ #include <sys/types.h> #include <stdio.h> #include <string.h> #include <strings.h> #include <stdlib.h> #include "pktmux.h" #include "limits.h" #include "localtypes.h" #include "tm3.h" #include "exitcodes.h" extern u_char rvi_msg[]; extern int rvi_msg_len; void handle_oabbr_response() { char buf[80]; unsigned val; if (rvi_msg[3]) { if (rvi_msg_len == 5) { sprintf(buf, "oabbr error %u (0x%02X)", rvi_msg[3], rvi_msg[3]); async_msg_output(buf); } else print_etm_pkt_raw("oabbr long error response"); return; } if (rvi_msg_len != 7) { print_etm_pkt_raw("oabbr response wrong length"); return; } val = rvi_msg[4] | (rvi_msg[5] << 8); sprintf(buf, "oabbr: %04X", val); async_msg_output(buf); } cmd_oabbr(argc, argv) char **argv; { u32 page, reg; u_char cmdpkt[5]; page = strtoul(argv[1], 0, 0); reg = strtoul(argv[2], 0, 0); if (page > 1 || reg > 31) { printf("error: argument(s) out of range\n"); return(ERROR_USAGE); } cmdpkt[1] = CODEC_READ; cmdpkt[2] = page << 5 | reg; cmdpkt[3] = 0; send_etm_cmd(cmdpkt, 3); return(0); } cmd_oabbw(argc, argv) char **argv; { u32 page, reg, val; u_char cmdpkt[7]; page = strtoul(argv[1], 0, 0); reg = strtoul(argv[2], 0, 0); val = strtoul(argv[3], 0, 16); if (page > 1 || reg > 31 || val > 0x3FF) { printf("error: argument(s) out of range\n"); return(ERROR_USAGE); } cmdpkt[1] = CODEC_WRITE; cmdpkt[2] = page << 5 | reg; cmdpkt[3] = 0; cmdpkt[4] = val; cmdpkt[5] = val >> 8; send_etm_cmd(cmdpkt, 5); return(0); }