FreeCalypso > hg > freecalypso-tools
view rvinterf/tmsh/audioresp.c @ 505:7bf0d909c87e
fc-loadtool flash ID check: change of reset after the check logic
This change only affects those flash configurations that have ID checks
enabled. The logic for resetting the flash after the ID check has been
changed as follows:
1) If the check fails, we return without attempting to reset the flash.
2) If the check is successful, we reset the flash using the configured
method (could be AMD or Intel or Intel W30) instead of always doing an
AMD flash reset as the original code did.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 27 May 2019 19:58:01 +0000 |
parents | ce7479d28b02 |
children |
line wrap: on
line source
/* * In this module we are going to implement the handling of ETM_AUDIO responses. */ #include <sys/types.h> #include <stdio.h> #include <string.h> #include <strings.h> #include <stdlib.h> #include "pktmux.h" #include "limits.h" #include "localtypes.h" #include "etm.h" extern u_char rvi_msg[]; extern int rvi_msg_len; static void aul_aus_response(op) char *op; { char buf[80]; if (rvi_msg_len != 6) { sprintf(buf, "%s response wrong length", op); print_etm_pkt_raw(buf); return; } if (rvi_msg[3]) sprintf(buf, "%s error %u (0x%02X)", op, rvi_msg[3], rvi_msg[3]); else sprintf(buf, "%s OK", op); async_msg_output(buf); } static void aur_response() { char buf[80], *dp; unsigned i, j, l, size; if (rvi_msg_len < 7) { tooshort: print_etm_pkt_raw("aur response too short"); return; } if (rvi_msg[3]) { if (rvi_msg_len == 7) { sprintf(buf, "aur %u error %u (0x%02X)", rvi_msg[5], rvi_msg[3], rvi_msg[3]); async_msg_output(buf); } else print_etm_pkt_raw("aur long error response"); return; } if (rvi_msg_len < 8) goto tooshort; size = rvi_msg_len - 7; sprintf(buf, "aur %u: %u byte%s", rvi_msg[5], size, size != 1 ? "s" : ""); async_msg_output(buf); for (i = 0; i < size; ) { l = size - i; if (l > 16) l = 16; sprintf(buf, "offset %02X:", i); dp = index(buf, '\0'); for (j = 0; j < l; j++) { if (j == 0 || j == 8) *dp++ = ' '; sprintf(dp, " %02X", rvi_msg[i + 6]); i++; dp += 3; } async_msg_output(buf); } } static void auw_response() { char buf[80]; if (rvi_msg_len != 7) { print_etm_pkt_raw("auw response wrong length"); return; } if (rvi_msg[3]) sprintf(buf, "auw %u error %u (0x%02X)", rvi_msg[5], rvi_msg[3], rvi_msg[3]); else sprintf(buf, "auw %u OK", rvi_msg[5]); async_msg_output(buf); } void etm_audio_msg_rx() { switch (rvi_msg[4]) { case 'L': aul_aus_response("aul"); return; case 'S': aul_aus_response("aus"); return; case 'R': aur_response(); return; case 'W': auw_response(); return; default: unknown: print_etm_pkt_raw("ETM_AUDIO"); } }