view target-utils/c139explore/main.c @ 505:7bf0d909c87e

fc-loadtool flash ID check: change of reset after the check logic This change only affects those flash configurations that have ID checks enabled. The logic for resetting the flash after the ID check has been changed as follows: 1) If the check fails, we return without attempting to reset the flash. 2) If the check is successful, we reset the flash using the configured method (could be AMD or Intel or Intel W30) instead of always doing an AMD flash reset as the original code did.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 27 May 2019 19:58:01 +0000
parents da53ea0a38ba
children fc3592a27317
line wrap: on
line source

#include "types.h"

#define	DELAY_1MS	13000

main()
{
	/* delay kludge workaround for defect in fc-compalram */
	wait_ARM_cycles(DELAY_1MS * 30);
	printf("C139 hardware exploration utility running\n");
	/* GPIO init, compatible with both C139 and SE J100 */
	*(volatile u16 *)0xfffe4802 = 0x0002;
	*(volatile u16 *)0xfffe4804 = 0x2A59;
	*(volatile u16 *)0xfffe4806 = 0xFFF3;	/* enable ARMIO clock */
	/* take peripherals out of reset */
	*(volatile u16 *)0xfffffd04 = 0xFFF3;
	abb_init();
	uwire_init();
	for (;;) {
		putchar('=');
		if (command_entry())
			command_dispatch();
	}
}