FreeCalypso > hg > freecalypso-tools
view target-utils/flash-boot-test/watchdog.c @ 505:7bf0d909c87e
fc-loadtool flash ID check: change of reset after the check logic
This change only affects those flash configurations that have ID checks
enabled. The logic for resetting the flash after the ID check has been
changed as follows:
1) If the check fails, we return without attempting to reset the flash.
2) If the check is successful, we reset the flash using the configured
method (could be AMD or Intel or Intel W30) instead of always doing an
AMD flash reset as the original code did.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 27 May 2019 19:58:01 +0000 |
parents | 3d7b546c710c |
children |
line wrap: on
line source
#include <sys/types.h> #include "types.h" void cmd_wd() { /* stop/disable the watchdog timer */ *(volatile u16 *)0xFFFFF804 = 0xF5; *(volatile u16 *)0xFFFFF804 = 0xA0; } void cmd_we() { /* watchdog enable */ *(volatile u16 *)0xFFFFF804 = 0x8000; } void cmd_wr() { /* read and display watchdog downcount register */ printf("%04X\n", *(volatile u16 *)0xFFFFF802); } void cmd_ww(argbulk) char *argbulk; { /* single or double write to WATCHDOG_TIM_MODE */ char *argv[3]; u_long w1, w2; if (parse_args(argbulk, 1, 2, argv, 0) < 0) return; if (parse_hexarg(argv[0], 4, &w1) < 0) { printf("ERROR: arg1 must be a valid 16-bit hex value\n"); return; } if (argv[1] && parse_hexarg(argv[1], 4, &w2) < 0) { printf("ERROR: arg2 must be a valid 16-bit hex value\n"); return; } /* do it */ *(volatile u16 *)0xFFFFF804 = w1; if (argv[1]) *(volatile u16 *)0xFFFFF804 = w2; }