view target-utils/pirexplore/rtc.c @ 505:7bf0d909c87e

fc-loadtool flash ID check: change of reset after the check logic This change only affects those flash configurations that have ID checks enabled. The logic for resetting the flash after the ID check has been changed as follows: 1) If the check fails, we return without attempting to reset the flash. 2) If the check is successful, we reset the flash using the configured method (could be AMD or Intel or Intel W30) instead of always doing an AMD flash reset as the original code did.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 27 May 2019 19:58:01 +0000
parents e7502631a0f9
children
line wrap: on
line source

#include "types.h"
#include "rtc.h"

static void
read_time(tm)
	struct rtctime *tm;
{
	tm->year = RTC_REGS.rtc_cur.year;
	tm->month = RTC_REGS.rtc_cur.month;
	tm->day_of_month = RTC_REGS.rtc_cur.day_of_month;
	tm->day_of_week = RTC_REGS.rtc_cur.day_of_week;
	tm->hours = RTC_REGS.rtc_cur.hours;
	tm->minutes = RTC_REGS.rtc_cur.minutes;
	tm->seconds = RTC_REGS.rtc_cur.seconds;
}

void
cmd_rtc()
{
	u8 ctrl;
	struct rtctime time1, time2;
	int c;

	ctrl = RTC_REGS.rtc_ctrl_reg;
	printf("RTC_CTRL_REG = %02X ", ctrl);
	switch (ctrl) {
	case 0x00:
		printf("(frozen)\n");
		break;
	case 0x01:
		printf("(running)\n");
		break;
	default:
		printf("(unexpected)\n");
		return;
	}
	printf("Reading RTC time");
	for (;;) {
		c = serial_in_poll();
		if (c >= 0) {
			printf("<INTERRUPT>\n");
			return;
		}
		read_time(&time1);
		read_time(&time2);
		if (!bcmp(&time1.minutes, &time2.minutes, 6))
			break;
	}
	printf("\nDATE %02X-%02X-%02X DOW %02X TIME %02X:%02X:%02X\n",
		time2.year, time2.month, time2.day_of_month, time2.day_of_week,
		time2.hours, time2.minutes, time2.seconds);
}

void
cmd_rtccomp()
{
	printf("%04X\n", (RTC_REGS.rtc_comp_msb_reg << 8) |
			  RTC_REGS.rtc_comp_lsb_reg);
}