FreeCalypso > hg > freecalypso-tools
view target-utils/tf-breakin/payload.S @ 505:7bf0d909c87e
fc-loadtool flash ID check: change of reset after the check logic
This change only affects those flash configurations that have ID checks
enabled. The logic for resetting the flash after the ID check has been
changed as follows:
1) If the check fails, we return without attempting to reset the flash.
2) If the check is successful, we reset the flash using the configured
method (could be AMD or Intel or Intel W30) instead of always doing an
AMD flash reset as the original code did.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Mon, 27 May 2019 19:58:01 +0000 |
| parents | e7502631a0f9 |
| children |
line wrap: on
line source
.text .org 0 @ allow entry in Thumb state .code 16 bx pc nop .code 32 @ set CPSR like mot931c payload does msr CPSR_c, #0xd3 @ disable the watchdog ldr r1, =0xfffff802 mov r0, #0xf5 strh r0, [r1, #2] mov r0, #0xa0 strh r0, [r1, #2] @ MODEM UART ldr r6, =0xffff5800 @ wait for any previous output to flush out 1: ldrb r0, [r6, #5] tst r0, #0x20 beq 1b @ send our indication adr r1, outstr mov r2, #6 1: ldrb r0, [r1], #1 strb r0, [r6] subs r2, r2, #1 bne 1b @ wait for this output to go out to the TxD pin 1: ldrb r0, [r6, #5] tst r0, #0x40 beq 1b @ enable the Calypso boot ROM ldr r1, =0xFFFFFB10 mov r2, #0x0100 strh r2, [r1] @ jump to it! mov pc, #0 .ltorg outstr: .byte 2,2,2,'O','K',2