view uptools/atcmd/smsend_pdugen.c @ 505:7bf0d909c87e

fc-loadtool flash ID check: change of reset after the check logic This change only affects those flash configurations that have ID checks enabled. The logic for resetting the flash after the ID check has been changed as follows: 1) If the check fails, we return without attempting to reset the flash. 2) If the check is successful, we reset the flash using the configured method (could be AMD or Intel or Intel W30) instead of always doing an AMD flash reset as the original code did.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 27 May 2019 19:58:01 +0000
parents a38805b5b6d4
children
line wrap: on
line source

/*
 * This module implements the encoding part of SMS sending/writing in PDU mode.
 */

#include <sys/types.h>

send_in_pdu_mode(da, textsrc, textlen, udh, udhl)
	u_char *da, *textsrc, *udh;
	unsigned textlen, udhl;
{
	u_char pdu[158];
	unsigned pdulen;
	char pduhex[317];

	pdu[0] = 0;
	pdulen = make_sms_submit_pdu(da, 0, 0, textsrc, textlen, udh, udhl,
					pdu + 1);
	make_hex_string(pdu, pdulen + 1, pduhex);
	send_pdu_out(pduhex, pdulen);
}

send_pdu_ucs2(da, textsrc, textlen, udh, udhl)
	u_char *da, *udh;
	u_short *textsrc;
	unsigned textlen, udhl;
{
	u_char ucs2_be[140], pdu[158];
	unsigned pdulen;
	char pduhex[317];

	ucs2_out_bigend(textsrc, ucs2_be, textlen);
	pdu[0] = 0;
	pdulen = make_sms_submit_pdu_8bit(da, 0, 0x08, ucs2_be, textlen * 2,
					  udh, udhl, pdu + 1);
	make_hex_string(pdu, pdulen + 1, pduhex);
	send_pdu_out(pduhex, pdulen);
}