view uptools/libcoding/grokdcs.c @ 505:7bf0d909c87e

fc-loadtool flash ID check: change of reset after the check logic This change only affects those flash configurations that have ID checks enabled. The logic for resetting the flash after the ID check has been changed as follows: 1) If the check fails, we return without attempting to reset the flash. 2) If the check is successful, we reset the flash using the configured method (could be AMD or Intel or Intel W30) instead of always doing an AMD flash reset as the original code did.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 27 May 2019 19:58:01 +0000
parents 097ce8431d11
children
line wrap: on
line source

/*
 * This library module implements the function that distills the complex
 * set of possible SMS DCS octet values to just one of 4 possibilities:
 * 7-bit text (7), 8-bit data octets (8), UCS-2 text (16) or compressed
 * data (9).
 *
 * The decoding is based on the 3GPP TS 23.038 V11.0.0 spec;
 * reserved encodings are treated as 7-bit text as the spec instructs.
 */

sms_dcs_classify(dcs)
{
	if (!(dcs & 0x80)) {
		if (dcs & 0x20)
			return(9);
		switch (dcs & 0xC) {
		case 0:
			return(7);
		case 4:
			return(8);
		case 8:
			return(16);
		default:
			/* reserved, treating as 7-bit per the spec */
			return(7);
		}
	}
	switch (dcs & 0xF0) {
	case 0x80:
	case 0x90:
	case 0xA0:
	case 0xB0:
		/* reserved, treating as 7-bit per the spec */
		return(7);
	case 0xC0:
	case 0xD0:
		return(7);
	case 0xE0:
		return(16);
	case 0xF0:
		if (dcs & 4)
			return(8);
		else
			return(7);
	}
}