fc-shell TCH DL handler: add support for CSD modes TCH DL capture mechanism in FC Tourmaline firmware has been extended to support CSD modes in addition to speech - add the necessary support on the host tools side. It needs to be noted that this mechanism in its present state does NOT provide the debug utility value that was sought: as we learned only after the code was implemented, TI's DSP has a misfeature in that the buffer we are reading (a_dd_0[]) is zeroed out when the IDS block is enabled, i.e., we are reading all zeros and not the real DL bits we were after. But since the code has already been written, we are keeping it - perhaps we can do some tests with IDS disabled.

/*
 * The exit-mode setting in the hardware parameter files specified with
 * -h or -H is meaningful only for fc-loadtool and fc-buzplay, but
 * the same hwparam.c code is included in fc-iram and fc-xram as well.
 * This module provides the stub, allowing fc-iram and fc-xram to link.
 */

void
set_default_exit_mode()
{
}