fc-shell TCH DL handler: add support for CSD modes TCH DL capture mechanism in FC Tourmaline firmware has been extended to support CSD modes in addition to speech - add the necessary support on the host tools side. It needs to be noted that this mechanism in its present state does NOT provide the debug utility value that was sought: as we learned only after the code was implemented, TI's DSP has a misfeature in that the buffer we are reading (a_dd_0[]) is zeroed out when the IDS block is enabled, i.e., we are reading all zeros and not the real DL bits we were after. But since the code has already been written, we are keeping it - perhaps we can do some tests with IDS disabled.

# Set WS=4 for both nCS0 and nCS1, matching what the official C155/156 fw sets

w16 fffffb00 00A4
w16 fffffb02 00A4

# We need to switch the CS4/ADD22 pin from its default function of CS4
# to the needed ADD22, to access the 8 MiB of flash.  Compal's C155/156
# in-flash boot code does this setting, but let's do it ourselves too.

w16 fffef006 0008

# We don't mess with the FFFF:FB10 register on C155/156, i.e., we
# leave the "enable boot ROM" setting established by compalstage.
# Unlike C139, C155 and C156 phones do have working flash mapping
# at 0x03000000, so we use that.