FreeCalypso > hg > freecalypso-tools

view openmoko/flash-modem.sh @ 1014:961efadd530a default tip

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
fc-shell TCH DL handler: add support for CSD modes TCH DL capture mechanism in FC Tourmaline firmware has been extended to support CSD modes in addition to speech - add the necessary support on the host tools side. It needs to be noted that this mechanism in its present state does NOT provide the debug utility value that was sought: as we learned only after the code was implemented, TI's DSP has a misfeature in that the buffer we are reading (a_dd_0[]) is zeroed out when the IDS block is enabled, i.e., we are reading all zeros and not the real DL bits we were after. But since the code has already been written, we are keeping it - perhaps we can do some tests with IDS disabled.
author Mychaela Falconia <falcon@freecalypso.org>
date Tue, 26 Nov 2024 06:27:43 +0000
parents 8bea9cdd8a89
children
line wrap: on
line source

#!/bin/sh

# This script shows how to flash an Openmoko modem (GTA01/02) with a new
# firmware image (in either *.m0 or *.bin format) in a fully automated manner
# using the new batch mode of fc-loadtool, running from inside the phone.
# This script should be used as a starting point by anyone who may be putting
# together an automated firmware update mechanism similar to OM's uSD card
# automated flasher.
#
# The flashing commands used here are correct ONLY for Openmoko and similar
# modems, _NOT_ for Motorola C1xx phones!!!  If you use these commands on a
# Mot C1xx phone, you will unrecoverably brick it!

if [ $# != 1 ]
then
	echo "usage: $0 firmware-image-file" 1>&2
	exit 1
fi

case "$1" in
	*.bin)
		BATCH_CMD="flash e-program-bin 0 $1"
		;;
	*.m0)
		BATCH_CMD="flash e-program-m0 $1"
		;;
	*)
		echo "error: format of $1 not recognized" 1>&2
		exit 1
esac

/opt/freecalypso/bin/fc-loadtool -h fic -Plm -t1300 /dev/ttySAC0 $BATCH_CMD