view rvinterf/asyncshell/at.c @ 1014:961efadd530a default tip

fc-shell TCH DL handler: add support for CSD modes TCH DL capture mechanism in FC Tourmaline firmware has been extended to support CSD modes in addition to speech - add the necessary support on the host tools side. It needs to be noted that this mechanism in its present state does NOT provide the debug utility value that was sought: as we learned only after the code was implemented, TI's DSP has a misfeature in that the buffer we are reading (a_dd_0[]) is zeroed out when the IDS block is enabled, i.e., we are reading all zeros and not the real DL bits we were after. But since the code has already been written, we are keeping it - perhaps we can do some tests with IDS disabled.
author Mychaela Falconia <falcon@freecalypso.org>
date Tue, 26 Nov 2024 06:27:43 +0000
parents 10f4062e049b
children
line wrap: on
line source

/*
 * Functions for the AT-over-RVTMUX interface
 */

#include <sys/types.h>
#include <sys/errno.h>
#include <stdio.h>
#include <ctype.h>
#include <string.h>
#include <strings.h>
#include <stdlib.h>
#include <unistd.h>
#include "pktmux.h"
#include "limits.h"
#include "exitcodes.h"

extern char *rvinterf_ttyport;
extern u_char rvi_msg[];
extern int rvi_msg_len;
extern int oneshot_nowait;
extern int sock;

send_string_to_ati(str)
	char *str;
{
	unsigned len;
	u_char sendpkt[MAX_PKT_TO_TARGET+1];

	len = strlen(str);
	if (len + 1 > MAX_PKT_TO_TARGET) {
		printf("error: max pkt to target limit exceeded\n");
		return(ERROR_USAGE);
	}
	/* fill out the packet */
	sendpkt[0] = RVT_AT_HEADER;
	strcpy(sendpkt + 1, str);
	/* send it! */
	send_pkt_to_target(sendpkt, len + 1);
	return(0);
}

send_unterm_string_to_ati(str)
	char *str;
{
	unsigned len;
	u_char sendpkt[MAX_PKT_TO_TARGET+1];

	len = strlen(str);
	if (len + 2 > MAX_PKT_TO_TARGET) {
		printf("error: max pkt to target limit exceeded\n");
		return(ERROR_USAGE);
	}
	/* fill out the packet */
	sendpkt[0] = RVT_AT_HEADER;
	sendpkt[1] = 0x01;
	strcpy(sendpkt + 2, str);
	/* send it! */
	send_pkt_to_target(sendpkt, len + 2);
	return(0);
}

void
cmd_sendat(arg)
	char *arg;
{
	while (isspace(*arg))
		arg++;
	if (!*arg) {
		printf("error: missing string argument\n");
		return;
	}
	ati_rx_control(1);
	send_string_to_ati(arg);
}

void
cmd_unterm(arg)
	char *arg;
{
	while (isspace(*arg))
		arg++;
	if (!*arg) {
		printf("error: missing string argument\n");
		return;
	}
	ati_rx_control(1);
	send_unterm_string_to_ati(arg);
}

oneshot_at_command(cmd)
	char *cmd;
{
	fd_set fds;
	int rc;

	if (!oneshot_nowait) {
		if (rvinterf_ttyport)
			usleep(30000);
		init();		/* to catch the response properly */
		ati_rx_control(1);
	}
	rc = send_string_to_ati(cmd);
	if (rc)
		exit(rc);
	if (oneshot_nowait)
		exit(0);
	/* wait for response */
	for (;;) {
		FD_ZERO(&fds);
		FD_SET(sock, &fds);
		rc = select(sock+1, &fds, 0, 0, 0);
		if (rc < 0) {
			if (errno == EINTR)
				continue;
			perror("select");
			exit(ERROR_UNIX);
		}
		if (FD_ISSET(sock, &fds))
			handle_rvinterf_input();
	}
}

cmd_str_oneshot(argc, argv)
	char **argv;
{
	return oneshot_at_command(argv[1]);
}

cmd_unterm_oneshot(argc, argv)
	char **argv;
{
	return send_unterm_string_to_ati(argv[1]);
}

void
oneshot_at_check_response()
{
	if (rvi_msg_len == 4 && !strncmp(rvi_msg + 2, "OK", 2))
		exit(0);
	if (rvi_msg_len == 4 && !strncmp(rvi_msg + 2, "> ", 2))
		exit(0);
	if (rvi_msg_len == 7 && !strncmp(rvi_msg + 2, "ERROR", 5))
		exit(ERROR_TARGET);
	if (rvi_msg_len == 6 && !strncmp(rvi_msg + 2, "BUSY", 4))
		exit(ERROR_TARGET);
	if (rvi_msg_len == 12 && !strncmp(rvi_msg + 2, "NO CARRIER", 10))
		exit(ERROR_TARGET);
	if (rvi_msg_len >= 12 && !strncmp(rvi_msg + 2, "+CME ERROR", 10))
		exit(ERROR_TARGET);
	if (rvi_msg_len >= 12 && !strncmp(rvi_msg + 2, "+CMS ERROR", 10))
		exit(ERROR_TARGET);
}