view rvinterf/asyncshell/oneshot.c @ 1014:961efadd530a default tip

fc-shell TCH DL handler: add support for CSD modes TCH DL capture mechanism in FC Tourmaline firmware has been extended to support CSD modes in addition to speech - add the necessary support on the host tools side. It needs to be noted that this mechanism in its present state does NOT provide the debug utility value that was sought: as we learned only after the code was implemented, TI's DSP has a misfeature in that the buffer we are reading (a_dd_0[]) is zeroed out when the IDS block is enabled, i.e., we are reading all zeros and not the real DL bits we were after. But since the code has already been written, we are keeping it - perhaps we can do some tests with IDS disabled.
author Mychaela Falconia <falcon@freecalypso.org>
date Tue, 26 Nov 2024 06:27:43 +0000
parents b55a81ce7497
children
line wrap: on
line source

/*
 * This module implements the one-shot command mode of fc-shell.
 */

#include <stdio.h>
#include <string.h>
#include <strings.h>
#include <stdlib.h>
#include "limits.h"
#include "exitcodes.h"

extern int cmd_batt_oneshot();
extern int cmd_key_oneshot();
extern int cmd_keydown_oneshot();
extern int cmd_keyup_oneshot();
extern int cmd_poweroff();
extern int cmd_send_oneshot();
extern int cmd_sp_oneshot();
extern int cmd_str_oneshot();
extern int cmd_tchdl_oneshot();
extern int cmd_tgtreset();
extern int cmd_unterm_oneshot();

static struct cmdtab {
	char *cmd;
	int minargs;
	int maxargs;
	int (*func)();
} cmdtab[] = {
	{"batt", 2, 2, cmd_batt_oneshot},
	{"key", 1, 1, cmd_key_oneshot},
	{"keydown", 1, 1, cmd_keydown_oneshot},
	{"keyup", 1, 1, cmd_keyup_oneshot},
	{"poweroff", 0, 0, cmd_poweroff},
	{"send", 1, MAX_PKT_TO_TARGET, cmd_send_oneshot},
	{"sp", 2, 2, cmd_sp_oneshot},
	{"str", 1, 1, cmd_str_oneshot},
	{"tch-dl", 1, 1, cmd_tchdl_oneshot},
	{"tgtreset", 0, 0, cmd_tgtreset},
	{"unterm", 1, 1, cmd_unterm_oneshot},
	{0, 0, 0, 0}
};

oneshot_command(argc, argv)
	char **argv;
{
	struct cmdtab *tp;

	if (!strncmp(argv[0], "AT", 2) || !strncmp(argv[0], "at", 2)) {
		if (argc != 1) {
			fprintf(stderr,
			"error: AT command must be a single argument\n");
			exit(ERROR_USAGE);
		}
		return oneshot_at_command(argv[0]);
	}
	for (tp = cmdtab; tp->cmd; tp++)
		if (!strcmp(tp->cmd, argv[0]))
			break;
	if (!tp->func) {
		fprintf(stderr,
			"error: \"%s\" is not a valid one-shot command\n",
			argv[0]);
		exit(ERROR_USAGE);
	}
	if (argc - 1 > tp->maxargs) {
		fprintf(stderr, "%s: too many arguments\n", tp->cmd);
		exit(ERROR_USAGE);
	}
	if (argc - 1 < tp->minargs) {
		fprintf(stderr, "%s: too few arguments\n", tp->cmd);
		exit(ERROR_USAGE);
	}
	return tp->func(argc, argv);
}