FreeCalypso > hg > freecalypso-tools
view target-utils/flash-boot-test/watchdog.c @ 1014:961efadd530a default tip
fc-shell TCH DL handler: add support for CSD modes
TCH DL capture mechanism in FC Tourmaline firmware has been extended
to support CSD modes in addition to speech - add the necessary support
on the host tools side.
It needs to be noted that this mechanism in its present state does NOT
provide the debug utility value that was sought: as we learned only
after the code was implemented, TI's DSP has a misfeature in that the
buffer we are reading (a_dd_0[]) is zeroed out when the IDS block
is enabled, i.e., we are reading all zeros and not the real DL bits
we were after. But since the code has already been written, we are
keeping it - perhaps we can do some tests with IDS disabled.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Tue, 26 Nov 2024 06:27:43 +0000 |
parents | 3d7b546c710c |
children |
line wrap: on
line source
#include <sys/types.h> #include "types.h" void cmd_wd() { /* stop/disable the watchdog timer */ *(volatile u16 *)0xFFFFF804 = 0xF5; *(volatile u16 *)0xFFFFF804 = 0xA0; } void cmd_we() { /* watchdog enable */ *(volatile u16 *)0xFFFFF804 = 0x8000; } void cmd_wr() { /* read and display watchdog downcount register */ printf("%04X\n", *(volatile u16 *)0xFFFFF802); } void cmd_ww(argbulk) char *argbulk; { /* single or double write to WATCHDOG_TIM_MODE */ char *argv[3]; u_long w1, w2; if (parse_args(argbulk, 1, 2, argv, 0) < 0) return; if (parse_hexarg(argv[0], 4, &w1) < 0) { printf("ERROR: arg1 must be a valid 16-bit hex value\n"); return; } if (argv[1] && parse_hexarg(argv[1], 4, &w2) < 0) { printf("ERROR: arg2 must be a valid 16-bit hex value\n"); return; } /* do it */ *(volatile u16 *)0xFFFFF804 = w1; if (argv[1]) *(volatile u16 *)0xFFFFF804 = w2; }