view target-utils/libcommon/cmd_memdump_human.c @ 1014:961efadd530a default tip

fc-shell TCH DL handler: add support for CSD modes TCH DL capture mechanism in FC Tourmaline firmware has been extended to support CSD modes in addition to speech - add the necessary support on the host tools side. It needs to be noted that this mechanism in its present state does NOT provide the debug utility value that was sought: as we learned only after the code was implemented, TI's DSP has a misfeature in that the buffer we are reading (a_dd_0[]) is zeroed out when the IDS block is enabled, i.e., we are reading all zeros and not the real DL bits we were after. But since the code has already been written, we are keeping it - perhaps we can do some tests with IDS disabled.
author Mychaela Falconia <falcon@freecalypso.org>
date Tue, 26 Nov 2024 06:27:43 +0000
parents 9214118ae941
children
line wrap: on
line source

/*
 * This is a human-oriented memory dump command.  The dump is given in
 * both hex and ASCII, with readable spacing.
 */

#include <sys/types.h>
#include "types.h"

void
cmd_memdump_human(argbulk)
	char *argbulk;
{
	char *argv[3];
	u_long start, length;
	u_long offset;
	u_char intbuf[16];
	int i, c;

	if (parse_args(argbulk, 2, 2, argv, 0) < 0)
		return;
	if (parse_hexarg(argv[0], 8, &start) < 0) {
		printf("ERROR: arg1 must be a valid 32-bit hex address\n");
		return;
	}
	if (parse_hexarg(argv[1], 8, &length) < 0) {
	    printf("ERROR: arg2 must be a valid 32-bit hex value (length)\n");
		return;
	}
	if (start & 0xF || length & 0xF) {
	    printf("ERROR: implementation limit: 16-byte alignment required\n");
		return;
	}
	for (offset = 0; offset < length; offset += 0x10) {
		memcpy(intbuf, start + offset, 0x10);
		printf("%08X: ", start + offset);
		for (i = 0; i < 16; i++) {
			printf("%02X ", intbuf[i]);
			if ((i & 3) == 3)
				putchar(' ');
		}
		for (i = 0; i < 16; i++) {
			c = intbuf[i];
			if (c >= ' ' && c <= '~')
				putchar(c);
			else
				putchar('.');
		}
		putchar('\n');
	}
}