ringtools/imy: fix duplicate definition of tdma_durations[] The bug was reported by Vadim Yanitskiy <fixeria@osmocom.org>, although the present fix is slightly different from the contributed patch: because main.c doesn't need this tdma_durations[] array at all, let's simply remove the reference to this array from main.c rather than turn it into an extern. I no longer remember my original thought flow that resulted (by mistake) in tdma_durations[] being multiply defined in main.c and durations.c. My intent might have been to define all globals in main.c and have the reference in durations.c be an extern - and I missed that extern - but without clear memory, I have no certainty. In any case, having this data array defined in the same module that fills it (durations.c) is sensible, so let's make it the new way.

# This configuration is for Motorola C155/156 phones.  Use the "generic"
# compal configuration for C11x/12x and C139/140.

compal-stage thumb

# Parameters for the Calypso boot ROM;
# will result in the ARM core being clocked at 52 MHz as we want.

pll-config 4/1
rhea-cntl 0x00

# The remaining settings are carried out via loadagent commands
init-script c155.init

# 8 MiB flash, accessible at 0x03000000 without any problems
flash single-8M 0x03000000

# bottom boot flash, sector 0 is only 8 KiB
boot-reflash-hack 0x820000 0x2000

# Perform a Iota poweroff when we are done
exit-mode iota-off