/*
 * This module implements the chain-loading of XRAM images via loadagent.
 */

#include <sys/types.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <strings.h>
#include "srecreader.h"

struct srecreader xramimage;

extern struct baudrate *current_baud_rate;
extern struct baudrate *xram_run_baudrate;
extern int xram_jtag_mode;

static void
make_ml_arg(rec, buf)
	u_char *rec;
	char *buf;
{
	register int i, len;
	register char *s;

	len = rec[0] + 1;
	s = buf;
	for (i = 0; i < len; i++) {
		sprintf(s, "%02X", rec[i]);
		s += 2;
	}
	*s = '\0';
}

perform_chain_load()
{
	int resp;
	unsigned long rec_count;
	char *argv[3], srecarg[516];

	if (open_srec_file(&xramimage) < 0)
		exit(1);
	argv[0] = "ML";
	argv[1] = srecarg;
	argv[2] = 0;
	for (rec_count = 0; ; ) {
		if (read_s_record(&xramimage) < 0)
			exit(1);
		switch (xramimage.record_type) {
		case '0':
			if (xramimage.lineno == 1)
				continue;
			fprintf(stderr,
		"%s: S0 record found in line %d (expected in line 1 only)\n",
				xramimage.filename, xramimage.lineno);
			exit(1);
		case '3':
		case '7':
			if (s3s7_get_addr_data(&xramimage) < 0)
				exit(1);
			break;
		default:
			fprintf(stderr,
				"%s line %d: S%c record type not supported\n",
				xramimage.filename, xramimage.lineno,
				xramimage.record_type);
			exit(1);
		}
		if (xramimage.record_type == '7')
			break;
		/* must be S3 */
		if (xramimage.datalen < 1) {
			fprintf(stderr,
				"%s line %d: S3 record has zero data length\n",
				xramimage.filename, xramimage.lineno);
			exit(1);
		}
		if (!rec_count)
			printf("Each \'.\' is 100 S-records\n");
		make_ml_arg(xramimage.record, srecarg);
		tpinterf_make_cmd(argv);
		if (tpinterf_send_cmd())
			exit(1);
		if (tpinterf_pass_output(1))
			exit(1);
		rec_count++;
		if (rec_count % 100 == 0) {
			putchar('.');
			fflush(stdout);
		}
	}
	/* got S7 */
	fclose(xramimage.openfile);
	if (!rec_count) {
		fprintf(stderr,
		"%s line %d: S7 without any preceding S3 data records\n",
			xramimage.filename, xramimage.lineno);
		exit(1);
	}
	putchar('\n');	/* newline after the dots */
	if (xram_run_baudrate != current_baud_rate) {
		resp = loadagent_switch_baud(xram_run_baudrate);
		if (resp)
			exit(1);
	}
	if (xram_jtag_mode) {
		printf(
      "Leaving target in loadagent for JTAG; image start address is 0x%08lX\n",
			(u_long) xramimage.addr);
		exit(0);
	}
	printf("Sending jump command\n");
	sprintf(srecarg, "%lX", (u_long) xramimage.addr);
	argv[0] = "jump";
	tpinterf_make_cmd(argv);
	if (tpinterf_send_cmd())
		exit(1);
	printf("Sent \"%s %s\": XRAM image should now be running!\n",
		argv[0], argv[1]);
	return(0);
}