FreeCalypso > hg > freecalypso-tools
view loadtools/scripts/dsample.config @ 607:d5abcbbf7432
scripts/gtm900[bp]-ffs-clean: remove some more wrong files
An earlier version of GTM900-B firmware has been found in the wild that
still has MFW&BMI layers included (producing files under /mmi), as well as
enlarged /pcm/L[DMR]N files. These files are wrong for FreeCalypso fw
and thus need to be cleaned out.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Tue, 11 Feb 2020 21:27:40 +0000 |
parents | 49ee210fc4fb |
children |
line wrap: on
line source
# The following parameters go into the <p command sent to the boot ROM # The values to be used have been gleaned from the 20020917 fw image # CLKTCXO input is 13 MHz on the D-Sample, and with Calypso C05 # the max allowed PLL'ed clock is 78 MHz for the DSP and 39 MHz for the ARM. # TI's firmware sets the PLL up to multiply by 6 (giving 78 MHz) with # divide by 2 for the ARM, but the boot ROM doesn't do the latter when # the input clock is 13 MHz. Hence we'll program the PLL to multiply # by 3, putting everything at 39 MHz. pll-config 3/1 rhea-cntl 0x00 # set by 20020917 fw, hence presumed correct # The remaining settings are carried out via loadagent commands init-script cs2-4ws-8mb.init # 8 MiB flash, accessible at 0x03000000 without any problems flash single-8M 0x03000000 # Perform a Iota poweroff when we are done exit-mode iota-off