view rvinterf/old/before-rvinterf/packetrx.c @ 619:f82551c77e58

libserial-newlnx: ASYNC_LOW_LATENCY patch reverted Reports from Das Signal indicate that loadtools performance on Debian is about the same as on Slackware, and that including or omitting the ASYNC_LOW_LATENCY patch from Serg makes no difference. Because the patch in question does not appear to be necessary, it is being reverted until and unless someone other than Serg reports an actual real-world system on which loadtools operation times are slowed compared to the Mother's Slackware reference and on which Slackware-like performance can be restored by setting the ASYNC_LOW_LATENCY flag.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 27 Feb 2020 01:09:48 +0000
parents e7502631a0f9
children
line wrap: on
line source

/*
 * This module handles the lowest level of serial packet Rx
 */

#include <sys/types.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include "pktmux.h"

extern int target_fd;

#define	MAXPKT	512
u_char rxpkt[MAXPKT];
size_t rxpkt_len;

extern char pr_item[];

static int in_pkt, dle_state, toobig;

static void
process_inbyte(inb)
{
	if (!in_pkt) {
		if (inb != STX || dle_state) {
			rxpkt_len++;
			dle_state = (inb == DLE);
			return;
		}
		if (rxpkt_len) {
			sprintf(pr_item,
				"Warning: Rx %u byte%s outside of a packet",
				(unsigned)rxpkt_len, rxpkt_len != 1 ? "s" : "");
			print_item();
			rxpkt_len = 0;
		}
		in_pkt = 1;
		toobig = 0;
		return;
	}
	if (dle_state) {
		dle_state = 0;
		if (inb != STX && inb != DLE) {
			sprintf(pr_item,
				"Rx framing error: %02X after DLE\n", inb);
			print_item();
			in_pkt = 0;
			rxpkt_len = 0;
			return;
		}
		goto data;
	}
	if (inb == DLE) {
		dle_state = 1;
		return;
	} else if (inb == STX) {
		if (!rxpkt_len)
			return;
		in_pkt = 0;
		handle_rx_packet();
		rxpkt_len = 0;
		return;
	}
data:	if (rxpkt_len >= MAXPKT) {
		if (!toobig) {
			sprintf(pr_item, "Error: Rx packet too big!\n");
			print_item();
			toobig = 1;
		}
		return;
	}
	rxpkt[rxpkt_len++] = inb;
}

void
process_serial_rx()
{
	u_char rdbuf[512];
	int cc, i;

	cc = read(target_fd, rdbuf, sizeof rdbuf);
	if (cc <= 0) {
		perror("Error/EOF reading from target");
		exit(1);
	}
	for (i = 0; i < cc; i++)
		process_inbyte(rdbuf[i]);
}